Everything you need to upgrade the indicators on your C5 to LED. These LEDs are brighter and more visible when you're on the road. LED bulbs run cooler reducing risk of melting bulb housing. The modern LED flasher relay allows adjustment of flashing rate.

You will receive two front bulbs, two rear bulbs and an LED compatible flasher relay. Enough to convert one C5.

Fitting the LED Flasher Relay

1. Remove the boot by undoing the top lock and sliding out the boot clips.
2. Locate the original relay flasher is a round silver can.
3. Remove two wires from the original relay.
4. Attach the new LED flasher relay to the body.
5. Attach the two wires to the new relay

Note: LED bulbs cannot be fitted the C5 indicator system without the LED compatible relay. 

Fitting Front Bulbs

1. Lift the front of your C5 and pull the bulb holder out of the back of the front indicators.
2. Remove the filament bulbs
3. Fit the new LED bulbs
4. Test to ensure bulbs are fitted the correct way round

Note: LED bulbs are polarity sensitive. If they dont work one way take them out and turn them round.

Fitting Rear Bulbs

1. Remove the boot by undoing the top lock and sliding out the boot clips.
2. Remove the indicator retaining clips to remove the indicator unit from the shell.
3. Remove the filament bulbs. Be careful not to dislodge the contacts and wiring.
4. Fit the new LED bulbs
5. Test to ensure bulbs are fitted the correct way round
6. Refit the indicator unit
7. Refit the boot along with its clips

Testing

1. Test your indicators. If they flash too fast or too slow for your liking use a flat head screwdriver to turn the screw in the bottom of the LED flasher relay.