Skip to product information
£2.95
Parts to fix broken mounts on Sinclair C5 indicators. This is a common problem and a good solution has been hard to find. This kit includes a new plastic insert and thumb twist screw. You will receive one insert and thumbscrew, enough for fixing one indicator.
Tools Required
- Rotary tool with small cutting fitment
- Craft knife / stanley blade
- Superglue
Instructions
- Use a rotary tool with the fine rod cutting attachment to cut out the original top clip.
- Fit the insert. Using a knife/blade cut away any additional material where necessary to acheive a tight fit.
- Fit the insert from the front and glue in position. The flange of the insert will cover the cutting marks. Allow to dry.
- Fit indicator to the C5. Recommend using new foam. You may need to drill an additional hole to run the wiring through.
- Fit the plastic bolt from inside to secure the indicator to the body.
The insert does sit proud by approximately 1mm but good foam gaskets will compress to accommodate this. See other items for new foam gaskets.